Automation of manual loaded and unloaded machines enables higher and saver productivity and higher and more consistent quality of your product.
The automation of the transport from the coiler-flattener to the welder is very important for the quality of the weld. The alignment of the plate ends must be perfect and during the transport of the product to the welder this alignment must be secured.
The swing arm transports the ring from the welder to the trimmer.
The transfer is a quick and accurate loading / unloading device for the welddresser.
When automation is required for manual loaded stand alone trimmer, roller and side trimmer, the automation can be executed with a robot.
The loader beam is a quick and accurate loading / unloading device for the roll formers.
When automation is required for manual loaded stand alone roll formers, the automation can be executed with robots.
The automation of the rim and the disc assembly includes handling and positioning of the rim and disc and placing them on a transfer to feed the assembly press.
Fontijne Holland does not only supply you with equipment that is used for automatic wheel production. Any sheet metal product that needs to be formed and/or profiled, can be produced on our equipment. If you need assistance with the production of your products, please contact us.